1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com l f0013_sc-d ? 3/28/2017 benefts ? wide variety o f sizes and specifcations ? i nductances up to 100 h ? r ated currents up to 20 a ? dc resistances as low as 8 m overview the kemet sc coils, sc-d high frequency type ac line flters are offered in a wide variety of sizes and s pecifcations. applications ? c onsumer electronics ? c ommon mode choke ac line filters sc coils, sc-d high frequency type part number system sc- 10- d 050 series rated current (a) type minimum inductance (h) sc- 0x = x a (e.g., 05 = 5 a) xx = xx a (e.g., 10 = 10 a) d = ni-zn ferrite core, high frequency xxx = xxx h (e.g., 100 = 100 h) 0xx = xx h (e.g., 060 = 60 h) ac line filters 23 common mode sc coils ? high frequency type sc-d type [rohs compliant] ? rated voltage: 250vac/vdc ? withstanding voltage: 2400v (2 sec between lines) ? insulation resistance: at 500vdc, more than 100m (between lines) ? thermal class: a (105?c) ? operating temperature range (?c): ?25 to t (t=105?temperature rise) ? inductance measurement condition:100khz, 1ma, kc547 ? pin pitch are reference only. not guaranteed values. shape and dimensions [mm] sc-02-d100 23 sc-03-d050 23 sc-04-d050 25 13 13 19 0.5 0.6 0.7 2 3 4 40 40 40 100 50 50 7 8 14 sc-05-d030 25 19 0.8 5 40 30 14 sc-08-d060 34 23 1.0 8 45 60 30 sc-10-d050 34 23 1.2 10 45 50 34 10 10 10 22 10 22 13 13 19 21 19 21 70 40 25 20 30 16 SC-15-D030 34 23 1.4 15 50 30 34 22 21 12 sc-20-d010 34 23 1.7 20 50 10 33 22 21 8 model dc resistance (m /line) max. temperature rise(k) max. inductance ( h) min. weight approx. (g) rated current (a) finished dimensions(mm) b od(max.) t(max.) pin pitch (reference) wire size (mm?) a sc-d vertical type (2a to 5a) od t 15 2.0 32 41 sc-d horizontal type (8a to 20a) od 15 2.0 t (a) 21 43 (b) (b) (a) 2 1 4 3 numbering system sc - 02 - d 100 ? ? ? 1 rated current (a) ni-zn ferrite core inductance (h) frequency characteristic sc coils ? high frequency type sc-d type [rohs compliant] 1k 10k 100k 1m 10m 30m 1 10 100 1k 10k 100k 1m frequency (hz) impedance ( ) 1 5 - d 0 3 0 1 0 - d 0 5 0 0 8 - d 0 6 0 2 0 - d 0 1 0 15-d030 10-d050 08-d060 20-d010 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 361 361 361 361 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 361 361 361 361 3 0 2 - d 1 0 0 0 5 - d 0 3 0 02-d100 05-d030 0 4 - d 0 5 0 0 3 - d 0 5 0 04-d050 03-d050 (a) (b) one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com l f0013_sc-d ? 3/28/2017 dimensions C millimeters vertical type ( 5 a) d t d t sl d t d t sst all kemet ac line filters are rohs compliant. rohs compliant table 1 C ratings & part number reference part number rated current ac (a) inductance (h) minimum dc resistance/ line (m) maximum temperature rise (k) maximum finished dimensions (mm) pin pitch (reference) diameter (mm) weight (g) approximate od (maximum) t (maximum) a b sc-02-d100 2 100 70 40 23 13 10 13 0.5 7 sc-03-d050 3 50 40 40 23 13 10 13 0.5 8 sc-04-d050 4 50 25 40 25 19 10 19 0.7 14 sc-05-d030 5 30 20 40 25 19 10 19 0.8 14 sc-08-d060 8 60 30 45 34 23 22 21 1.0 30 sc-10-d050 10 50 16 45 34 23 22 21 1.2 34 SC-15-D030 15 30 12 50 34 23 22 21 1.4 34 sc-20-d010 20 10 8 50 34 23 22 21 1.7 33 1 pin pitch listed above for reference only. values not guaranteed. horizontal type ( 8 a) d t d t ac line filters ? sc coils, sc-d high frequency type
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com l f0013_sc-d ? 3/28/2017 specifcations item sc-d rated voltage 250 vac/vdc withstanding voltage 2,400 v (2 seconds, between lines) insulation resistance > 100 m at 500 vdc (between lines) thermal class a (105c) operating temperature range ?25c to t (t = 105 C temperature rise) inductance measurement condition 100 khz, 1 ma, kc547 frequency characteristics ac line filters 23 common mode sc coils ? high frequency type sc-d type [rohs compliant] ? rated voltage: 250vac/vdc ? withstanding voltage: 2400v (2 sec between lines) ? insulation resistance: at 500vdc, more than 100m (between lines) ? thermal class: a (105?c) ? operating temperature range (?c): ?25 to t (t=105?temperature rise) ? inductance measurement condition:100khz, 1ma, kc547 ? pin pitch are reference only. not guaranteed values. shape and dimensions [mm] sc-02-d100 23 sc-03-d050 23 sc-04-d050 25 13 13 19 0.5 0.6 0.7 2 3 4 40 40 40 100 50 50 7 8 14 sc-05-d030 25 19 0.8 5 40 30 14 sc-08-d060 34 23 1.0 8 45 60 30 sc-10-d050 34 23 1.2 10 45 50 34 10 10 10 22 10 22 13 13 19 21 19 21 70 40 25 20 30 16 SC-15-D030 34 23 1.4 15 50 30 34 22 21 12 sc-20-d010 34 23 1.7 20 50 10 33 22 21 8 model dc resistance (m /line) max. temperature rise(k) max. inductance ( h) min. weight approx. (g) rated current (a) finished dimensions(mm) b od(max.) t(max.) pin pitch (reference) wire size (mm?) a sc-d vertical type (2a to 5a) od t 15 2.0 32 41 sc-d horizontal type (8a to 20a) od 15 2.0 t (a) 21 43 (b) (b) (a) 2 1 4 3 numbering system sc - 02 - d 100 ? ? ? 1 rated current (a) ni-zn ferrite core inductance (h) frequency characteristic sc coils ? high frequency type sc-d type [rohs compliant] 1k 10k 100k 1m 10m 30m 1 10 100 1k 10k 100k 1m frequency (hz) impedance ( ) 1 5 - d 0 3 0 1 0 - d 0 5 0 0 8 - d 0 6 0 2 0 - d 0 1 0 15-d030 10-d050 08-d060 20-d010 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 361 361 361 361 3 1m 100k 10k 1k 100 10 1 impedance ( ) frequency (hz) 1k 10k 100k 1m 10m 30m 3 6 1 3 6 1 3 6 1 3 6 1 1 3 6 1 3 6 361 361 361 361 3 0 2 - d 1 0 0 0 5 - d 0 3 0 02-d100 05-d030 0 4 - d 0 5 0 0 3 - d 0 5 0 04-d050 03-d050 (a) (b) notes on use shelf life ? u se within 6 months. if the product is used after a storage period of 6 months or longer, confrm its solderability b efore use. storage condition ? a void storage in high temperature and high humidity environment, as such condition may deteriorate the solderability of external electrode. ? a void storage in atmosphere containing toxic gases or acid (e.g., sulphur and chlorine), as such gas may deteriorate the solderability of external electrode. ? a void storage near strong magnetic feld, as such condition may magnetize the product. ac line filters ? sc coils, sc-d high frequency type
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com l f0013_sc-d ? 3/28/2017 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. ac line filters ? sc coils, sc-d high frequency type
|
